Auto Fab

Arkworks Tools is a program initially designed to automate our drawing files This is the main window of the tool, and right here is the Auto Fabrication Module. On this side of the window, we have here the sample files, details, fabrication template, and the tags and elevations. This is the stage of the process where the program gathers all the temporary fabrication tags and the elevation drawing together with the corresponding color or finish. Based on these drawing samples, this stage of the process should take us about less than a minute. So off we go. This is what it looks Okay, we are done with the analyzing stage as we call it. Now we proceed to the final part. We now have gathered the parts here. Now what we do next is to assign a color or finish on each part and have them selected accordingly, Or select them as a group. Let's have these parts right here. I think I'll label it blue. And for the suffix rule, I'll have BL for it. Operating information makes it quicker for us to do this thing. And for the other parts, we can have bone white. Let's have BW for that. Actually, we can do this simultaneously in different finishes. Click on this button to select these files. And those you don't want to include, just click on them. And there. Everything is set so we're good to go. Normally, these sharp drawing samples should take about 10 minutes, but I've modified the recorded video, so I won'take so much of your time. Here is the detailed drawings window that's being processed. The program is now gathering the actual parts, adjustments and special loads to be needed for the fabrication alb Okay, the next window in process is the elevation drawings. Here, the program gathers the dimensions of the millions daylight openings and then counterchecks with the detailed drawings for calculation and furnish these information to the final fabrication alb We are now at the final stage of the process. The program is supplying the dimensions, distributions and everything to complete the alb This should be done in a minute from now. We're in the final parts. Okay, this is now the final output of our fabrication alb Here we have the TN500, 501, 506. You might wonder why some of these are not processed. It's because we have unselected some of the parts a while ago. That's all for now. Thank you very much guys and have a good day ahead.