We are a local business dedicated to providing you with a safer smoking alternative.
Hi this is Rick from Mod Maker. Today I'd We're pleased to be stocking it and it's a great bit of kit, very well engineered. And we're running through the differences between this and the version 3. Okay, the first thing you may notice is the tab. It's a slightly different tab. I don't know about you but when I use these ones I always use to bend that so it's not against the enclosure. So with this one it's even easier. It's got a thinner piece of brass there and easier to bend when you come to putting it in your mod. You'll also notice there'slightly more thread on the new version which in my opinion is a good thing because I So that's another plus. Now the biggest difference is the fact that it's got interchangeable top caps. Top caps, I suppose they're called top caps. And they don't need to be changed. You don't have to make them up before you put it on your mod. You can actually change them after and I'll show you how it works. It comes unscrewed from the outside. So when it's on your mod you can just interchange it. You could put a bigger one in there or a smaller one in there. It's got a thread there as you can see and there's a thread on the top cap. Top cap washer. Juice well washer, that's what they've been called. And with these new versions as an optional extra you can get a 22mm washer. It looks You'll see there's a thread on there. This is how it works. So imagine this was on your mod. You would just put that up against the edge and screw it on. You've got a 22mm washer on there. There's also a 30mm washer which looks That's a big chunk and that just screws on as well just So it's quite a flexible connector whereas you could, if you're making mods to sell possibly you might set it up with just the standard 15mm one. And the customer, if they choose to put a bigger one on there they could buy them. So pretty flexible. Right, I'll take it apart so you can see what it's made up of. Okay, firstly you've got your washer. So you've got your locking nut, you've got your tab. Then you can undo this. It's got your pin. And that's all the self-contained unit. So looking at that when you put this on your mod your enclosure would come up to, well this would locate on the outside of your enclosure. And then when you came to deciding which washer you wanted to put on that would go on there and it sits flush with the outside of your enclosure. So pretty clever, pretty clever design all in all. So let's put it all back together now. So that goes in there And your tab would go on. Securing nut. And if you're I'll just stick a 22 on there. And there you go, that's it, the version 4, that Deli Vapes 510 connector.
