Interior covers and replacement parts
And today I'm excited to share with It is the dashboard multi-mount system from taco garage I'm doing to the truck and my buddy's trucks And today I'mounting the DMM or dashboard multi-mount system from taco garage on a t I do have the hardware still in the bag right there But as you can see it's just a few plates that are pre-drilled that will accept We are gonna clamp this down So we know exactly where we need to drill the holes that will go Through the top unit through the center unit and down below so everything can get attached Okay, so there's what everything looks There's nothing really to drill into but on these side pieces Make sure you don't go too deep and hit the AC vents And then the next part is just to get a small file and clean up the plastic burrs You can see here on all the holes okay for each of the plates when you're installing it once you get the holes lined up You will use One of these pegs in the center pieces you will use the two right there You can see and on these side pieces are just one in the middle and that will hold everything in place So you can get these side bolts lined up and that's the part that'll actually hold everything together once everything's lined up you'll then remove these and On the install video from the company it showed them going Obviously you can see on the ones scideshow on instagram go ahead and check him out doing great things over there will be tons of videos on this truck in particular coming soon tons of cool lighting mods and stuff that I know All right everybody Thank you so much for supporting the channel by watc
