Striker Wheels

Handcut and thread. Sheen of t Get every spoke length wit You can see down in there. A lot of people Lightweight is definitely good to have, but also keeping it strong. Sorry, camera's t Keeping it strong at the same time as weight. Every wheel that we build gets tested for strength and even spoke tension. The t Every wheel we stress test. So what it means is that spinless wheel strained out. Very good tension to it. We check the gauge based off the chart. What our readings are. Keeping good spoke tension even around. Usually 5 to 10% range is decent. That spoke there was a little bit loose, so I'm going to come through and assess that. And a couple of them are a little bit Before that we're going to pull t We stress out our wheels. We lay them down on the table. We push on both sides of the rim. I hope you can see that there. We're adding pressure to both sides of the rim. See how straight and strong it lasts. Get the wheel back into the stand. Sorry I'm not the best camera guy here. Get there you go. Got it locked into place. Spin our wheel. Still accurate, straight, smooth. Check our spoke tension. See how well the tension has been holding good. Bam. We're spot on our tension now. Spokes battled in pretty good. T