Blink Lash Store

I wanted to make a short video to show you how to use the W lashes and the Y lashes from Blink Lash Store using several different tweezers. The first tweezers is a boot like vol You want to make sure your tension is good on these. So grab the lash down at the base on the right pressure point, which is right about there with your tweezers and there with the lashes. Now we're going to apply it to the lash. Dip it in a small amount of glue and then make your placement. Our next tweezers looks Also made for vol So once again we need to grab the lash on the correct pressure point, which is right there on the tweezers and right there on the lash. You'll dip a little bit into the adhesive and then apply it to the lash. These lashes I'm applying it to are . 07 so they're very similar in thickness to a natural lash. Our next tweezers looks A little more of a hook tweezers. This can also be used for vol So grab the lash at the correct pressure point, lift up and you can see it's always in the same spot, the same spot on the tweezers and the same spot on the 3D lash. Dip it in the adhesive. Now we're going to apply. You want to just slightly let go and make your placement. Our last tweezers is the Vitas ESD 15. Make sure your tension is good. Grab the lash in the same place, lift upwards. You can see it's always the same kind of placement with every lash and every tweezers I've done so far. Now dip it in your glue. This glue I'm using is the Q1.