Reclaim Renew

They'redoing some offices out here in Chesterfield Valley. We're going to transform t It's their logo wall So we're going to have a big sign here, a big plastic sign that goes here. There will be two TVs and then their big logo will be in the middle. So we've chose gray barmen for this wall and We'll let I'm going to show you the progress that we go through. We have three inch wood, four inch wood, five inch wood, and six inch wood here. And we'll do each row will be a specific width and we'll work our way up the tools you need. A nailer, one hand saw works great for tight corners and then a jigsaw to get around the outlets. The boards to show you those. They're cut down. Have a plain back. They're smooth. They go up a wall easy. And the front obviously is the pretty side. We have the outlets here. So we'll just mark where these are. The outlets cover. And that's why it's marked on we'll transfer the parts on here. We'll cut them out. 20 minutes in. We have a good chunk of it done. So we've been here about an hour and a half. We're almost done. The wall is looking great. It's gray board. He's always too when you're doing t Paint that wall a dark gray or a black. And that way when all these little holes on here, you really can't even see them. You can see the black marks today. The star makes it seem to make the wall look better, I t Looking great. Alright, we put our last board in. Jay, what'd you t It was easier than I thought. So t It's all been kiln dried. It's been lightly sanded. T Guys, that's what we did. We did it in about, We're going to get the sign up. We'll show you the finished product.