Prestige Motorsports

Yoshii, Shinya Prestige Motorsports. I'm in the Donal Room. I think This is 427. It's made of all-al The CNC cylinder head is also installed. The edel block, which is processed by Ford, is also equipped with a quick-fuel cableter. It has a 404 lifter, a solid roller, and a geyser locker. It's a great combination. As you can see, the front end is also equipped with an AC alternator. This is a car, and everyone drives the circuit and drives it several times. That's what it is. That is, it's a really high-speed combination. In the case of the 904 lifter, the target is about 7500 rpm. I think the front was 8000 rpm. So you don't have to keep it down all the time. So let's actually drive it and see what happens. The torque is 488 ft. The peak torque is 559. The important thing here is that It's 58, 59, 59, 59, and 567. It's really good and flat. That's the situation. The peak torque is 7100 rpm to 786 rpm. It'starting to drop a little when it's 7500 rpm. As I said before, it's a combination of 7500 rpm including an AC. The height is the same. Remove the exhaust pipe and check if there's any problem.