Bravo Wireless

Hello and It is time to see how we can reset our wireless devices to their factory settings. In case we delete devices from our Bravo panel configuration, we also have to reset those devices to their factory settings. By doing this, we can make sure that we can use those devices in another Bravo system configuration. Here are a few examples how to reset wireless detectors. To reset the magnetic contact, remove the device lid and then press and hold the reset button as it is shown on the video. Hold the reset button until the device LED blinks in green three times in a row, which means that the device has been reset successfully. To reset Bravo motion detector, follow the same sequence. Remove the lid, press and hold the reset button until the device LED indicates for the successful operation. The same algorithm is used for resetting any other type of detector, including the Bravo outdoor sirens. The only difference is the way we reset the Bravo RC remote control. This device needs a special button combination in order to get reset. Here is how we can do that. We need to press and hold the arm button and the star button simultaneously, until the info LED turns red. Then we need to press the info button right after that. The Bravo RC indication will confirm for the successful reset by three green blinks in a row. We hope you find this video useful. In the next one, we will see how to replace the device batteries. Working with Bravo is fun!