Beta Wireless

The first time a receiver and transmitter in a GLXD system are turned on, they will automatically link. This link will reform each time the components are turned back on. However, you may sometimes wish to link a receiver with a different transmitter. In this case, you can manually link the components. They will then stay linked until you manually link the receiver to a different transmitter. Turn on the transmitter. Within five seconds, press and hold the link button until the transmitter LED begins to flash green. Press and hold the link button on the receiver. The blue RF LED will flash and then remain on when the link has been established. You can create a combo system by linking two transmitters to a single receiver. Only one transmitter can work at a time. If you turn on both at once, you will get interference. First, link one transmitter to the receiver as directed earlier. Turn off this transmitter and turn on the second one. Within five seconds, press and hold the link button until the LED on the second transmitter begins to flash green. Check the audio and adjust the gain if necessary. Gain settings for each transmitter will be independently stored in the receiver and automatically recalled when the transmitter is active. Manual linking may never be necessary if you only have one GLXD transmitter and receiver. But if you have multiple transmitters, manual linking allows extra flexibility.