KIT N CABOODLES

We just received a message and this is a bit interesting. So, Procude, we know that we have a 3M and 5M power with magnetic sim. And what we did was to make a 5M power. So, you can still enter your A4 machine, but faster. So, the same rules are happening. Okay, never, never, never place 5M power on the bottom. Always place the hope on the top because that's what prevents it from falling. So, 3M power on the bottom. We made 2 magnetic sim cards. You can cut one of them into 2 to make a 5M magnetic sim. Make a hole in the top of the box. Now I have a 300G SM card here. So, I will really push it to the extreme. I always use a sharp knife. And then on the top. So, you can't enter it that way. You have to enter it so that the part is wider here. The longest part here is inserted into the machine. If not, the sensor will not detect the part inside. But this is a very quick and easy way if you are difficult with manual and can't use a small machine. This is a good way to use it. And you can see the cut is perfect because you can see all the small pencils. It looks That's all the logic that requires. But in a very short time. So, as a beginner, we want to achieve the most fun part. So, let's do the part that makes it more fun. Okay, so, A5, 3M, 5M. You will need a magnetic board that is cut into 2. The work is done. Awesome, right? Get your first look before the finish. If you want to see more of the highlight craft, make sure you click the By clicking the button below this and You can also click here to see our latest video or click here to see more videos Thank you.