Trash2Treasure

Hello and I am Angie and So, let's get started. For the first project I use the legs of a wooden hooker, w I first cut off the legs from the sitting area with my multifunctional tool. The legs of then I built a wooden frame, w I then glued these to the legs and nailed them. I would have attached the legs with screws, but all the screws I had on hand were either too long or too short. I then glued the legs to the table plate. So I just built a box around the sitting area, in w Then I glued the sides of the frame to the legs. Then I cut another piece of wood and glued it to the side of the front, glued to the sides and then also Would that be a pro-fie? No way! But I just do it won't be extremely difficult to hold. That's why I don't worry much about it. After I had attached the legs, I attached the top side with wood glue and nails. I also glued small wooden remains under the corners of the box, so that it is straight everywhere. I also glued the legs to the table plate. Next, I found a round piece of wood in my wooden frame, w So I attached it with gorilla glue and let it dry overnight. After drying, I turned the ring around so that the wood was up top. For me it was easier to glue it t In addition, these screws were really hard to loosen. Then I turned the table around and I don't Now I am going to glue the wooden frame. I have to glue the wooden frame in place. For me it was easier to glue it in place than I had used a piece of wood glue. But I have to glue it in place. I have to glue it in place, so that it doesn't stick to the table plate. I have to glue it in place. Normally I wouldn't be able to nail the table plate, but since it was so t So I will just fill it with a spout. It will be smooth Next I will see the color with several layers. I applied some spray-gray paint on the metal parts to use them as a base. Here we got a simple picture and the edge space of moy It goes back to a typo. I will apply some next colors and cover it T I t But if you don't have a UD form, you can also use fondant forms. T You can find it in the department for cake decoration. You can also find it at Walmart or Amazon. Then I used a slightly air-dry tone and a silicone form to cover the side of the metal ring. I also applied a small square metal ring to the corners of the box. The box has a small square metal ring. I also applied a small square metal ring to the corners of the box. I used a silicone form to cover the front of the box. I have finally used the stamp set, Reed Builder, from UD to press the edge. I have also lightly processed the legs and then treated the whole t In addition, I treated all the tone elements with black wax. For the second project I use a metal tablet from Dollar Tree. I first used something I simply heated and removed the sticker with my foil. After the paint was dried, I processed the edges with some sandpaper. For the handles I will use a piece of wood glue. I cut off two 10 cm long pieces. I cut a hole in the edge and put the nail files through. Then I cut off a small piece of the floor because it is a bit long. I cut it off, folded it and then I use my E6000 glue. I glue it on the sides. After I had glued the wood glue handles, I used the IOD stamp set, antiquity and a pig in the middle of the tablet. You can also simply glue it on or a picture on it. I tried to work it out again, but as you can see, there are some ghost pictures because I didn't really set it up. Since I've masked the stamp, I simply sanded the picture a little. Did it help? Not much. But it's just to see from the close. For my last project I use a frame that I bought at Target and a picture from rice paper. I first painted the back of the inner frame w Then I used liquid patina myself and applied a sharp motif on the base. After drying I removed excess paper with sandpaper. Then I worked the picture with the two-stage crackle medi I did t Next, I transferred the frame with antiquity to give it an old look. I used the antiquity on the sharp motif to lift the crackle and then put the picture in the frame. I hope you enjoyed these simple projects and we'll