Eureka Ergonomic

Okay, so I have the file-based studio script. Is that a st script? Is that a studio script? What the hell is that? Let's try it again. Okay, so I have the file-based studio script from Eureka. Eureka is ergonomic. Okay, so I have the file-based studio script from Eureka ergonomic. I think before we go through all the specifications and functions of this part, we have to assemble it. So, let'start right away. I have a timer here. I think we will hopefully be ready in less than two hours. But whatever, let's just start with it, instead of gr There you have it. The timer has started. Let'start building the part together. 27 steps, 28th A, should be easy. Step 1. Everything is written in this small layout here. That's practical. That's how it should be. Everything is out. What's wrong with me? Don't answer. Sorry for this angle here. Step 2. Put the file here. Step 3. Put the file aside. Okay, I have to get the file up here. No, okay. That's one hour. 40 minutes. Not that bad. I thought it would take an hour. Doesn't look Luckily, I can mark it on my right side, which is also the right side here. But if you want to have it on the left side, it's not possible with this script. But we'll see later if it's going to be a problem. I don'think it's going to be one, but I know that people have their preferences. Let's go up here. But it's not done yet. That's a long script. Okay. 70 minutes. Okay. Step 19. How many steps did I say? 28 steps. Almost done. That's a huge mousepad that goes over the whole script. Okay. So 104 minutes. That's about an hour, four, five, four, four, five minutes. Let's clean up all the cables. I have to remove the double-sided tape to attach the lamps down here. My cable management is terrible, but okay, let's clean it up and then look at all the technical data and functions of this script. I'm done. So this is the Eureka ergonomic ERO-Pro WinShaped Steeper. I've been using it for a few weeks now and have made it my main workstation. Before I talk about my experiences and the use of this script, let's take a look at all the functions of the ERO-Pro. This is the longer 183 cm long version of the ERO-Pro. There is also a shorter 160 cm long version. Both have a 58 cm deep table surface. Because of its shape, it is 4 cm deep from the front. It is wing-shaped so that everything is used. This makes it easier to grab the script and get things. The surface consists of wood while the stand was made of lead steel. With a weight of almost 45 kg, it is not light weight. The colors are walnut, horn and black. I have the last one. It is a stand-up script. That means you can adjust the height from 84 cm to 122 cm. It has a double-motor lift system with a capacity of 100 kg. Let's test that out quickly. Okay, the capacity of this desk is 100 kg. I weigh about 45 kg less, but let's test it I have just set it to the lowest setting. So let's go over here and set the highest height. I have the setting n I'm out of the picture now. I'll bend down a little so you can still see me. Oh no, that's not a good pose. Okay, oh, I'm really going away now. Let's go deeper. You can still see me. Oh no, there you have it. It can easily carry 54 kg. But let's put it back down. Because I don't And there you have it. Oh no, I've unlocked the security mechanism. Please let me down. It's good to know that there is a security mechanism. Have I already talked about it? If not, I will do it. Everything is controlled via this controller, with which you can save up to three pre-installed heights. I Because the keyboard layout is actually a little lower than the main desk. The desk is equipped with a collision protection D. H. It stops and quickly goes up again when it hits the resistance. The cell phone and tablet holder are on both sides. On the bottom side there is even a save-in, through which you can carry a charging cable. Under the desk is adjustable layout for the keyboard to easily store. I recently discovered that you can turn it when you are looking at it. I got the desk with the accessories. Therefore I have a few more things, than if you only get the standard version of this desk. First, you will notice the three layouts up here, which you can attach to different places of the desk. I Each layout can carry up to 13. 6 kilograms. Underneath these layouts are also RGB strips, which can be used to display the desk. The control is done via two buttons, which are attached to the ends. With a button you can turn on and off the lighting. With the other one you can switch between the 14 different modes. There is also a lighting function, with which you can switch the lighting into the white light mode. Next comes the complete mousepad for the desk. Yes, the total of 183 cm long desk is basically a huge mousepad. This is the great thing about egoshooters or real-time strategy games. And if the mousepad is not enough, there is also a keyboard layout mousepad in the delivery area. Basically, this whole desk is a single huge mousepad. There are two cable guides, one on each side, to hide all cables. Or you can even bring a socket power supply there. Unfortunately, no instructions are provided for cable management. So don't let us talk about my skills in dealing with cables. On the left side of the desk is the flexible double hook. It fits perfectly to hang headphones. And the last accessories is a drink holder, which is attached to the right side of the desk and can be turned away. It is excellent for your water bottle. Who do I do something for? It is perfect to hold your monster can or even your coffee cup, since it has a saving for the handle. I know that he is more marketed as a gaming desk, but I use it as my processing desk. I use another stand-by, the same length. But after the construction of the European Pro, he felt I can't explain it, but this desk helps me to concentrate better when I work. A problem that I have with it is the keyboard layout, which is a bit too low than I would It is adjustable, but I wish I could set it a bit higher, since I am too lazy to hit it with my knees. Another problem that I have with it is the controller, with which the table can be adjusted. When other stand-by, a pressure is removed, the rest of the stand. After that, the height can be set. Here, the table moves in the position of the one you are pressing, as soon as you press the controller. So if you don't know which part of the controller you have to press, or if you tap it from the view, the table starts to move. I wish it would wake up before the height setting, instead of a lever, to the height of the table. Considering these smaller problems, this will be my permanent job for the processing station in the future. My old stand-by desk was degraded to the product layout desk for my other YouTube videos. If you are interested in the European Pro, I will put the link in the description. Do I have a promo code? If yes, I will also notice it there. And if not, oops! I'm going to see if I can find a few cable ties or tubes or something for my cable management. Or if someone wants to help me out there, just call me. No, seriously, I need help. See you then!