A&J Farmhouse Style

Hello guys, M, it's not really an entrance area. I t And I t I have searched in the local antiquities shops, but couldn't find anyt My motto is so, if you can't find it, then do it yourself. So I will do that today. I go to my workshop and try to build a furniture piece for t Believe me, it won't be anyt But I will see what I can do. If you ask yourself why it looks so bad be I work on it, to build the living room for the spring. I will show that in a future video. I can hardly wait. The spring is always my favorite time. So let's go to the workshop and see what we can do. I believe, I will use t I got it from a neighbor else, who didn't want it anymore. And I want to make the sides and the door of t So I will see if I can find a few nice pieces here. The closet should be about 35 cm deep. That means that the sides should be about 35 cm wide and the wall width, w That will be the back side. And at the end I make the door. Now I only make the back side and the sides up and down. For me it is always easier, if I put everyt It looks I take that. A few centimeters more should also be enough. These boards are really very smooth and of course I don't want these red spots on it. To get to the w I t It'still pretty cold outside. But I just don't want t I don't want to breathe it in. So if I'm outside, it should be okay. I will cut my boards and then grind them. In t Until then I need 6 boards for my both sides. And then I have to choose a few for the back side. I try to use the most beautiful boards for the sides, because we can only see these. Here is somet That definitely doesn't belong to my favorite tasks. Here are the boards that I want to use for the side of the shelf. M, they look really good. Now I just sanded the back side to remove the dirt. I didn't sand it until this beautiful color, because it won't be visible I have the four corners of the shelf in front. So I have to make the inner corners of 4x4. And instead of using a whole 4x4 for each corner, I will keep my front wheel and keep it for a long time. And we have invested in another table saw at the end. I'm not sure if I showed you, but our old man gave up the spirit. So now I have a new one, with w So that you can see better how it all gets together, I try to explain it here and as well as I can, if someone wants to try something But here I have my four x sticks, w And here is my stack of boards. These are the ones that have been sanded off the most beautiful wood. And these pieces are the back walls, also just sanded off here to remove the dirt. I didn't do that necessarily to make the nice color. So I'm going to go on and put the back wall out here. So I'm trying to put these pieces together so that as few cracks as possible between the wood. I mean, I want it to look But M, some of these pieces are pretty lost. So I'm going to have a few cracks. As you can see, t And these four x four pieces will be along the edge here. And then my arrangements are attached to the outside. In t I don't see the edge of my back wall. So let's put them together. I'm going to glue the pieces and then glue them together with my airtight nail. Maybe a few screws here and there, only to strengthen them. I'm going to put some of the two x four pieces of the cut in here horizontally through the middle. And that will be a place for my shelf, where they rest and hold the wood at the same time. Today I'm using my Senko airtight nail. Normally I only use my so-called small pins. But for t And I was really impressed. A few years ago I bought t I these are usually really expensive. To strengthen these parts, I'm going to screw them into the side screws. Here is the back part of the shelf, finished together and strengthened with screws on the sides. As you can see, the boards are longer than the actual frames here. And that's what it's about, either to hold the top or bottom side. I did that at both ends. Hey! Here I am ready to attach the top and bottom side to t And I'm just using some three quarters of a 12-stick wooden stick, w I thought I wouldn't see them For the front side I use the same wood as for the sides and the back side. I have to remove the old nails, cut them into the right size, w I have this wooden box here, as it is here, it looks threatening But I want to attach these cut two times four pieces up and down here. If I attach them up and down here, I have a place where I can fasten my boards. Kitsa, Kitsa. T In any case, very primitive with these cracks between the boards, but I t I'm impressed so far. Next I have to put the door in. I put the door in here in my front frame. The door would then be bound with t Another option would be to put it outside over the frame and let it overlap there. But I t And from experience I know that I have to make the door about 10 centimeters smaller than the actual opening. Here I have the frame part of the door and I just attach the individual boards to the frame is cut to the size that fits perfectly into the inside of t It has sealed these boards well. Old wood is also used to give dirt and the polyacryl has raised it. I want to install shelves here. I have decided to wait until the end. So I could easily finish the inside without having the shelves on the way. And now I can go outside. I'm just thinking about sticking a series of n I give the whole t Everyt I thought if I were to see a few boards with n Maybe I'll get my griller out, cut a template and paint a few n If you don't But I'll try. I t Oh, I I Everyday baby is not I'll tell you more about that later. I've sanded off the inside of the door I didn't see anyt I thought it would be nice to hang a mirror on the inside of the door. I found t I the sticker is available in my Etsy shop, if you are looking for an offer for your entrance or another place to your house. I bought t Kitzu, Kitzu. Kitzu, Kitzu. Kitzu, Kitzu. Kitzu, Kitzu. Kitzu, Kitzu. Kitzu, Kitzu. Kitzu, Kitzu. Kitzu, Kitzu. Kitzu, Kitzu. I t I want to mention one t We worked on it in the last months to change the cut pattern. We had problems with some sizes that were too big and some people said that they were too big. So we tried to change it and in the end we designed a completely new cut pattern for t I am really excited about it. I can actually wear it. I couldn't wear size small earlier. What I wear here is size small and we sewed a wide rubber band on top. I try to put a photo on the screen here. I would say that you sit more But they are still not so tight that you can hardly get up. For me they are exactly right. I t I still wanted to mention that we don't have many of them on the website and only list the ones we have on the website. I have some new colors for the spring in the offer that you might want to see. The one I wear is a color that we also had in the old model and was one of our best sellers. A really pretty green with w I know that not all of you I will link the link below in the description. I have another article for the spring deco that I want to show you quickly and w I only have a limited n They are w The hazes are delivered without a motive, but if you want to add the word hop, I have a separate offer for it and I will link everyt I hope you have a nice day and I look forward to seeing you in the next video. Bye.