The Pink Daisy

Welcome to my store. Music Well, if you're watc Today we're going to be featuring the t So we're going to focus in on t Okay, well let's go ahead and get you started on how to make t First of all, if you've purchased one of our kits, you won't even need to have a straight edge cutter because we've done all the cutting for you. But if you are starting from the beginning, these are the different pieces and their sizes as well as the different cutting utensils that you will need. You'll need a three-quarter inch round circle. You'll also need a handheld punch, a paper piercer, good pair of scissors, and a couple different types of adhesive. Well, let's go ahead and get started then. We'll start with the two background pieces. We'll put those together and then we'll create what we call anchor. T Now what you want to remember is there will be no adhesive placed be You'll use your paper piercer and attach your brads. After having pierced through the paper and attac And that is the part that will be the moving part that rolls your pictures back and forth. In order to do the assembly, you want to assemble first your squares. So we're going to put our animals together with their backgrounds. We'll start first with the green squares. And then from there, we'll back those with the blue squares. After you have assembled, you'll notice that you have your three animals that have their blue squares. One animal just has the green square. And that's because you're going to start from the bottom up to work on t In order to create t And then we've scored each on the following measurement. The first scoring is done at two inches. And you can do this with a bone folder or on your cutting board Two and three-quarter, three and a half, and four and a fourth. Once that's been scored, you're going to go back and you're going to really crease those score lines so that they'ready to roll as you put your pictures on there. What you're going to do with the moving mechanism is build from the bottom up. So the little animal without the blue square goes on first, then your adhesive will go between the two scoring lines, attac The next one, the same idea until you get to the very end. So let's go ahead and attach those. So here's my bottom animal that we're just putting. So The next one, your adhesive will go only between the two scoring lines. And we'll follow it with the next one. And the next one. So we have worked from the bottom up, ending with the lion. At that point, you're going to take the bottom of t Now, in order to adhere t You're going to just go ahead and attach your glue. And t So we're going to put that there. And just to test it out, so you're going to pull it. Look at that. It's working. Woohoo, that's exciting. Then the rest of it now is just embellis So what we'll do, we've already punched out. T We're going to attach it so that the person that you're giving t So you fold it in half. I'm going to use my hand punch. And then what we'll do is we're going to tuck t And we'll attach the ribbon. And then we're going to trim up. From there, we're going to attach our little Sane. And the Sane is Life Can Be a Zoo. Don't we all know that? And then we're going to put the ribbon that you've got left, especially if you've got one of our kits, it's already there for you. You just need to take it and tie one knot just Trim up your edges. And just use a glue dot. It's nice and g And that will go up here at the top. So now you've got the last thanks for being there. So t Just I won't push that back up. As you work with your card, it will roll easier and easier. Then what you'll do is you'll take it and attach it to the front of the card. And there you have it.