Sleep Number

We'll show you how to open your bed to inspect or replace a component part. This is one of the most popular sleep n Your bed may be slightly different. We'll be referencing the right and the left. T First unzip the removable cover. The zipper is located at the head of the bed. Unzip the cover all the way around your bed to remove it. Some of our beds come with a duvet style cover and have two zippers to access the top and bottom parts of the mattress. The top zipper accesses the foam comfort pad and the lower zipper accesses the air chambers and other bed components. Some beds may have a T It will look different inside the bed based on what series or model of bed you have. Every sleep n Some beds may or may not have a foam comfort pad. If your bed has a foam comfort pad visible when you open it, remove the foam comfort pad and set it aside. Handle the foam carefully to avoid damaging or tearing. Memory foam beds have an inner cover panel under the memory foam support layer. Unzip and remove the inner cover panel to access the rest of the bed. Now we will show you how to replace your air chambers. First remove the end wall at the head of the bed to access the hose connection. Next disconnect the air hose from the air chamber you will be replacing. To disconnect the hose, push in the gray tab with your th Some beds contain zippered air chambers. After disconnecting the hose, unzip the air chambers and remove the old air chamber. If your bed contains a center foam wall between the air chambers, ensure that t Before installing the new air chamber, locate the hose connection on the bottom side of the air chamber. Next place the new air chamber inside the sleep n Before connecting the firmness control system hose to the new air chamber, identify the right and left hoses. The left hose is labeled with L's. Additionally, some systems have color coded hoses, w Connect the appropriate hose to the air chamber by fitting the hose over the connector and pus Gently tug the hose to ensure that the connections are secure. Inflate the air chamber to 100 and then deflate to 50 to ensure that the air chamber was installed correctly. If the air chamber is not inflating or deflating, check that there are no kinks in the hose and that the air chamber is installed bottom side down. For most beds, replace the comfort pad over the bed. Align the foam comfort pad with the foot and sides of the bed. Pull the cover sides up around the foam comfort pad. If your bed has a border wrap, position it over the foam comfort pad, then position the top panel of the mattress cover back over the sleep n