CFR Performance is a major automotive supplier and distributor of car and truck accessories. We are a part of a family owned and operated tradition of automotive Excellency, which dates back to the late 1970's. Since then we have put together some ne
So before installing t Now let's get started. So the first step when installing this kit you want to mount your water p You have 3 holes on the passenger side and 3 holes on the driver side. Another gasket is in place. You can remove the bolts and add the bracket plate. You want to make sure to use blue thread lock to prevent any bolts from coming loose. Now we mount the AC compressor using the rear bracket attached to the water p You want to leave it slightly loose for further alignment. With the bracket slightly tightened now we mount the AC compressor. The large bracket plate has a 2 inch spacer on the driver side right be Go into the rear AC bracket. Now we tighten the top ear of the AC compressor bracket. Remember when tightening these bolts we do not want to tighten them all the way. Just a nice snug fit for further adjustments. To mount the alternator we only have 2 bolts. One on the top ear. The alternator. One on the bottom. One on the bottom w Make sure you screw it on. Forget to bolt down your alternator wire. Once you have your alternator secure and the power cable hooked up you can mount the power steering p Now that the brackets are mounted on it's time to bolt our pulleys. We're mounting the tensioner we want to make sure we bolt it down to 25 foot pounds.