SLC Headlight Restore

Apparently, we should cart with 180, then 280, then 360, then 600, then 800, then 1200. And you don't have to cart some extract here and there. In reality, you have to literally cart the surface in a uniform way, you can't leave stains. So you have to dedicate a little time. I would say at least 2 or 3 minutes good on each glass paper. And when you arrive at the last glass paper, you should have a very smooth surface of the headlights. And then you would apply the chemical product that they give you. And then you would use one of these cups and a vaporizer right here to vaporize the headlights and repair the glass. So, I'll try, I'll see how it works. So, first of all, 180 is done. Let's move on to the next step, which is 280. And what you have, take your 280 and usually divide it in half in this way. And then I use it on the headlights. So, you can't use it dry. You have to splash water and soap on the light for good. And you have to take your time. So, if your first windshield was You have to choose different reasons with each windshield. At this point, I went down to 800 of glass paper and the headlights have a much smoother windshield. It's not so rough. So, I did an last step of 1200. Look how it comes. So, I put the liquid here. And then you can see that it'smoking. And while I apply it near the headlights, very, very close. It really works. So, the only way it wouldn't work is if you didn'turn the light on correctly. It's the only way this process would work. Why is the surface smooth? It works better. So, I think the windshield will get tired very quickly if you do it well. Surely. But at the end, M, the windshield took me about an hour. What you are trying to do with the windshield is to create a completely new surface on the plastic. By cutting it, you are basically creating a very smooth surface if you do all the steps correctly. And this here, or cable, helps repair the cracks and areas of the windshield. So, I want to make sure that you are painting the surface with a grain of windshield paper. And at the end, you should have a extremely smooth surface. Don'take it off the touch. Don't you want to have some depth? Tada! You can see that it looks incredible. Confront it with that. We have a new look at the roof. So, I will try again with this and I will have a happy customer. What you should do is to make sure that you use every grid and every windshield paper grid and you should create small areas and over the walls of the windshield. So, I will try again with this and I will have a happy customer. Make sure that you use every grid and every windshield paper grid and you should create small areas and over the walls of the windshield paper. And if you do it correctly, this product will work. What I bought is, I think I don't know which brand it is. I will put a link in the description. It's Amazon, so if you have an Amazon account, you should be able to buy it for a few dollars. And if you have a set of 500-dollar lights, 600 dollars, this will help you save. It takes about an hour of your time and a lot of oil and rubber. Well, thank you very much for watching. Take care of yourself. Bye!