RPM Rollbars

What's up everybody? Brick here, Brick Ask a Rods. I got the RPM roll bar here. We got all the hardware out of the box. There was no instructions in the box. I'm with BassTech right now and they're getting a hold of the RPM, trying to give me the rest of stuff. I just want to kind of show you what's in the box. There's a bunch of hardware. Here's the pin, the quick release pin for your bar. These are the spacers that go underneath of the actual roll bar between your car and the bottom plate. And then we have the actual bottom plates. Now none of these are drilled. I don't know if that's right or not, so I just called them up and they're gonna get a hold of RPM and check with them. But literally none of these, I mean they drill the holes so they could hang them and powder coat them. But every single bracket is bare. So I mean if you've got a drill 30 holes between your car and the brackets, I don't really consider that bolt in. So hopefully it's just a mistake and we're gonna get it figured out. But I mean for $2,000 for a roll cage where you could just go to I really wanted a bolt in because I wanted it, I looked all over the internet and I wanted to find somet Even with really good drill bits, this is gonna take you, So I'm hoping it's just a mistake. I'm in the middle of doing the install video. We have the cage in the car. They did drill all of the top pieces. T So I'm t Maybe that's why they didn't drill them. But I mean that's really nice and it's great. There's great welds on it. I just for $2,000 you wouldn't be able to just put some bolts in and drill a couple holes. So I tried to return it before and they told me I could not return it because it's a custom piece. So we're gonna talk it fast so I can see where we're at and I'll keep you updated.