C & C Automotive

Today we spray some Nacin Basis Lac and Clear Lac on and use a relatively price-effective pistol from Kempel Haus. After gluing and cleaning the car, we can blow away the dust. Next, we use wax and grease to remove dust and dirt. I have somet It is not very wet. I have already wiped the place off before starting with wax and grease. Now we only focus on removing the dust. The slight moisture helps to remove the dust. Next, I use a dry, clean hand and w You do not have to do t But I t Finally, we work with a dust cloth to make sure that we wipe the last remaining dust. And then you wipe it off just a little. You do not have to press it. We start with a layer of sealant to make it a little darker. And that is the pattern that we will use. Heat. Heat. Heat. Heat. Heat. Heat. Heat. Heat. The first layer is a t Heat. Heat. Heat. Heat. The second layer is a medi Heat. Heat. Heat. Heat. Heat. Heat. Heat. Heat. Heat. Heat. Heat. Heat. We will use the same gun for the clear paint. And the first layer is only a layer of sealant. Then we will apply two wet layers. We apply the same layer of sealant. And now two wet layers of clear paint. I have a small layer of sealant because I saw that somet And I did not want to risk going in. We use the same gun. Heat. Heat. Heat. Heat. Heat. A small tip that can help to save a paint. Check before spraying engine hood, roofs or trunk covers, if it comes to lex. In t If you have a full tank, it can run out of the lid, either from the ventilation or from the thread. If you have a leak, you can bind a flap around it. And if it runs out, t If you use a conventional gun, you can bind it If you paint an engine hood and run out of somet I hope you In addition, I tried the CH Altsvegg Spritz gun for about $ 30. If you want to get my latest videos, then do not forget to click on the subscribe button.