Sound Wave Customs

What's going on guys? Ethan here at Soundwave Customs. Ethan with no hat, Ethan. Coming at you, not live. Unfortunately, Facebook is not allowing us to go live. I'm sure they're probably just updating or there is a ton of people waiting for Tech Tip Tuesday from Soundwave Customs and Now I'm just joking. Let's hope that's the case. So we cannot go live today. Normally we're going to come at you live. T We're going to come at you every Tuesday and we're going to try to make t So we're going to start with t And w And t It doesn't matter if you have a newer body style Tundra or an old car that has scratches and dents. We protect every ve So we have paint protection film on the areas that we're working on the body. We have throw away seat covers that we use. We have steering wheel covers that we'll show you inside the truck and even have Soundwave Customs floor mats So we'll show you the front real quick. I want to get to the Tech Tip part which I'm going to show you, So as you see, we've got the steering wheel cover and the floor mat and t Of course, And let's go to the side that we're going to talk about Tech Tip Tuesday. So t But a lot of customers come in and will show or be interested in getting an amplifier. T And for those of you that don't not know what a five channel is, it is basically almost two amps in one shell. The four channel runs the front rear doors. The fifth channel is dedicated for a sub or sub woofers, of course, client specific or on that. Sorry, it says not live. Remember, we're not even going to edit this is, We're still going to come at you with all bloopers and everyt So we actually unbolted the seat in t So we go to the extra length of doing amplifier installs and we will show you t Let me grab my light there. So you can see that. So here you have t We use ABS plastic material. We actually routed t You can see that one right there. So we did not drill any new holes. We use the factory bolts as well. So this is easily removable and all the wiring is very clean and We used a factory amplifier bypass harness to bypass the non JBL toyed amplifier and everyt So as I was explaining to you here are label makers. T And we label everyt It is the proper and professional way to do t So here's a couple label makers that we have right here some different size heat shrinks that we are showing you. So once again as I was explaining we label every wire on t We also fully meter tune the amplifier as well but that is a whole other tech tip Tuesday we'll get to how to properly tune an amplifier at a later time. We use the beautiful ground up in the seal plate. So use a nice ground there all of the PPF film. This is running off of factory radio in here and then we integrated you can't even tell if unless I showed you this is the JL audio bass knob right there right next to the customer's factory USB and auxiliary ports and cigarette lighter ports as well that is an aftermarket bass knob that we added on and of course when we take stuff apart we use sandwich bags labeled with what the vehicles are the bolts that we took out for the seat so that way we know these are the seat bolts and if we take a door panel off we'll have one labeled So a lot of customers ask me Well we don't just throw the amplifier in the car that's not who we are that's not what we do we are professionals we go through all kinds of lengths of training and years of experience to do t Let me show you the factory amp that came out of t So as you can tell there's a lot of work that goes into this process not only removing the seat but making a com we'll see you next Tuesday live t