Discount Tire

Here we go. How's it going? I'm the Miliano Sausage. I work at Discount Tire and if you're getting higher here, I'm going to show you how to change the tires. First, you want to grab your socket. Right now we're rocking with a Vimix and that fits perfectly on there. It doesn't spin extra. So we're going to go ahead and take off the lugs. Put that on there. We're going to flip this so it spins left so it loosens up the lugs. I'm going to give it a little tap. Take the assembly off. Take the center cap out. Grab a buff gun. Then we're just going to b Just We're going to come over here now. These tires take a little bit of a while to de-air it. We're going to de-air it by taking the valve core out with a valve core remover. We're going to go ahead and bring it over here. We're going to pop this first bead just Bring it in there. Right up to the center end. Boom, first bead. You're going to flip the tire down. Grab these back too. Just On there. Sometimes you got to do an exit. Grab that out. Now, pass the assembly. Bring it outside. You're going to spin it to where the valve is right here. Right under the duct head. Boom. Grab the bar. Get it under. Boom. You're going to wait for it to come back around under the duct head. You're going to get this bar under that last lip. Then pull. Push. Then guide it off. We're going to remove the valve. Now this one doesn't have a sensor. It's using a rubber so we're just going to attach this. Break it off. Sometimes as you can see here you'll need a little piece. Grab this poker. Then grab it. Boom. Grab your new rubber valve. Replace it. Boom. No dirtiness on the rim so we're not going to buff it. There is usually just grab this. Now we're going to go up around. We're going to grab our all terrain. Then we're going to ask our service vehicle here. White outer black out. We're going to go black out. Which means the black is out. We're going to put some lube on it. Just around the rims of the tire. Ready edges. Then we're going to come up on top of the duct head on the right side. Pull and then we're going to push the left hand. Guide that under. Push this under. As you can see. Here's a tricky part for some people. Grab here. Then we're going to blast it. It's filling up. We have to be filled it up with air. We're just going to throw it in the air cage. What's the PSI? I had 35. So it's already set at 35. Then throw it in the cage Don't roll it in there. Get the start. That's how you fill up a tire. There we go.