Discount Tire

Here we go. How's it going? I'm Lamiliano Salseda. I work at Discount Tire and if you're getting First, you want to grab your socket. Right now we're rocking with a Vimix and that fits perfectly on there. It doesn't spin extra. So we're going to go ahead and take off the lugs. Put that on there. We're going to flip t I'm going to give it a little tap. Take the assembly off. Take the center cap out. Grab a buff gun. Then we're just going to b Just We're going to come over here now. These tires take a little bit of a we're going to de-air it by taking the valve core out with the valve core remover. I'm going to go get another Vimix so there's a lot better to do now. Once we've already had one of the de-air right here, I'm going to go ahead and bring it over here. You're going to pop this first bead just Bring it in there. Right up to the center end. Once you've got the foam first bead, you're going to flip the tires out. Grab these back too. Just Right here. Sometimes you got to do that quickly. Boom. Grab that out. Now, tap the assembly. Bring me outside. You're going to spin it to where the valve is right here. Right under the tuck end. Boom. Grab the bar. Get it under. Boom. Then you're going to wait for it to come back around under the tuck end. You're going to get then pull, push, and then guide it off. As we're guiding it off, we're going to remove the valve. Now, t Break it off. Sometimes, as you can see here, you'll leave a little piece. Just going to grab then grab it. Boom. Grab your new rubber valve. Replace it. Boom. No dirtiness on the rim, so we're not going to buff it. There it is. Usually, just grab t Buck it up. We're going to grab our all terrain. Then we're going to ask our service worker here, why not a blackout? We're going to go blackout, we're going to put some lube on it just around the rims of the tire, where the edges are. Then, we're going to come up on top of the duck head on the right side. Then we're going to pull and then we're going to push with our left hand and guide that on here. Push there's a tricky part for some people. Grab here. Then we're going to blast it. It didn't work. There we go. As you can see, it's filling up. We have popped the bead, filled it up with air. We're just going to throw it in the air cage. What's the PSI? I did 35. So it's already set at 35? We're just going to put it in. Throw it in the cage Don't roll it in there. Take a start. And that's how you fill up a tire. There we go.