Axle Parts
If you go to craneaxle. com, go to products and then Axle Assemblies, you'll see those are the roller axles, ready to ride axles, and then just build our components. I'll go through and click on these categories and kind of explain what each one is and how those product pages work. Once you click into roller axles, you'll see all the options we offer here. Roller axles are basically Axle Assemblies where there's no internal components These are just choosing housing locations on front axles, brakes, adding a diff cover. Basically getting an Axle Assembly home that you can use to start fabricating, putting any trusses, some tabs, getting it fit up correctly to flex test, and then coming back and buying the more expensive parts You'll see we have front axles, 14 bolts, rear axle, 14 bolts, and then front and rear of Dana 80s also. I'll just go ahead and click t So once you're on this page, you can start selecting the options you want, And as you see, when you click on the option, the picture actually will change so 99 or add a 13 bolt and we will actually cut that housing for you. We offer four different standard options for wheel or wheel mount surfaces. That is 65, 67, 69, 72 inches. Now, if you need one custom, we can do that. You'll just need to give us a call. Any question you have about any of the axle assemblies, just give us a call if you can't figure it out on our website. We're always here to help. Now, I'm going to ready to ride axles. Now, these are basically roller axles with all of those internal components already installed. So with these ones, you are getting the ring and pinion, the axle shafts, the spool, whatever options you choose. And as you can see on t You will notice that these prices start The three-quarter ton brakes come standard. You can upgrade the lightweight brakes for extra 750 axle shafts. You're already getting a standard one, but you can upgrade those also. And again, the picture will change with each option you choose, but you are able to get these, and again, standard option. That's why that price was so That is basically it for ready to ride. And then continuing on to the builder components. Now, these builder components are basic axle housings, housings with C's, C's and knuckles, just the standard to get you started. We offer rear ones with just the spindles installed, unibaring cups. Now, these have very limited options in them. They're just getting that start for you, such as t You choose the housing location and then just a the housing location, and then just a diff cover, and that is basically it. So that is about it, guys. So we tried to separate these out as many options as possible so Again, if you have any questions, give us a call. We are always here to help you out. Thank you.
