The Detail Shoppe LLC

Looks I'm Zachary Jordan. I am a detailer slash owner slash business entrepreneur. My business partner's name is Ryan Gibb. He's also a detailer and we both work here at the detail shop and run DudeChef. We're here to have a look at the details of the Debron and make the best of it. The steps to the detail we did on t We do it step by step. We start with the wheels because they're normally going to be the dirtiest. They're going to have the iron particles. We start there. We do a Maguire's non-acid wheel and tire cleaner on them first, followed by a Maguire's iron decontamination. More or less a basic hand wash, making sure your wheel wells are clean, getting the mass majority of the dirt off of the ve We clean it top to bottom. We use the two bucket method to make sure we're getting all of t We make sure we get all of that off, followed by clay barring the car, w Clay bar the entire t We move the car over into our detail bay after we're done was And then we do a polish on the ve We actually, I believe on the t You don't want to over put cut down or over put polish or under put on that, on my hand too. Because if you under put it, you're not doing the job effectively enough to be able to get to the paint where you want it to be. But if you over put it, it's going to be really, really hard to take off. A good way to know that you're in the range of the right amount is if the, whatever it is, the, the leftover left on the paint after you polished it is if it's hard or easy to take off. If it's easy to take off, that means you've broken the, either the polish or the cut down enough and you did it right. But if it's really, really hard to take off, that means you probably didn't do it long enough or your buffer speed isn't fast enough or there's, it could be a bunch of different reasons, but you should be on the panel longer if it's harder to take off. I love using the Expel ceramic because it's extremely t However, when you're pulling it off, the only drawback I have with it is it feels very sticky. I haven't had any other ceramics do t It does kind of fill in all the cracks and crevices, w You got your Avalon King, w Expel has, each one is specifically formulated for we use the wheel and caliper one because it works well on So t It's kind of cool. I used to do t We use Expel ceramics because they are individualized products and Expel has its paint and PPF ceramic. It has a window ceramic. It has a plastic and trim ceramic. And we're able to go over the entire ve And then that is going to protect the car for, The ceramic is going to help. One with the ease of maintenance. Was And it's just the best t When we're detailing cars, one of the first t It doesn't, And so it's really important to us that we let our customers know, hey, your car isn't beating Not everybody's going to have the paint protection film, but most people have the ability to, You don't even need to go as far as a polish in most daily driver scenarios, but to just have even a good spray wax on there, just somet Whenever someone brings us their car, that sends a message to us that they care enough about their vehicle to take it to us in the first place that we're going to treat it We're going to recommend to them exactly what we would do and do to our own cars, but at the Detail Shop we take pride in what we do here. We always are trying to continue to learn what the most proper way to take care of a ve We're always making improvements here. We're in Eastern Idaho in a small town called Rexburg. We're here first and foremost for the community that we're in. We're here for the detailing community. We're going to be doing a lot of cool t Help us gain followers and we will continue to make content and we will hopefully be able to provide content that everyone enjoys. We're honestly a community and we hope to do not